Search Results


Search
Date from (mm/dd/yyyy): Date to: (mm/dd/yyyy)

    Go to Page: 

Terms found entire site: CPSC-CH-E1003-09_1(13), pdf(3785), CPSC-CH-E1003-09_1 pdf(13),
Found 677 Documents Showing Results 1 to 10
02/25/2011http://www.cpsc.gov/PageFiles/125424/CPSC-CH-E1003-09_1.pdf (100%)
Summary: Total Lead (Pb) in Paint and Other Similar Surface Coatings, Revision (CPSC-CH-E1003-09.1)
Extract: UNITED STATES CONSUMER PRODUCT SAFETY COMMISSION DIRECTORATE FOR LABORATORY SCIENCES DIVISION OF CHEMISTRY Test Method: CPSC-CH-E1003-09.1 Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings* February 25, 2011 This document provides information on the test methodology that is used by the U.S. Consumer Product Safety Commission's (CPSC) Product Testing Laboratory, Chemistry Division (LSC), in the analysis of paint and certain painted products. The methodology is used to determine the total lead content of paint, or a painted surface, on a dry paint basis.

03/14/2012http://www.cpsc.gov/PageFiles/91441/tprequirements.pdf (100%)
Summary: Proposed Rule: Requirements Pertaining to Third Party Conformity Assessment Bodies
Extract: cpsc.gov/about/cpsia/CPSC-CH-E1003-09_1.pdf 9 http://www.cpsc.gov/about/cpsia/CPSC-CH-E1002-08_1.pdf 10 http://www.cpsc.gov/about/cpsia/CPSC-CH-E1001-08_1.pdf THIS DOCUMENT HAS NOT BEEN REVIEWED OR ACCEPTED BY THE COMMISSION. CLEARED FOR PUBLIC RELEASE UNDER CPSA 6(b)(1) 18 testing laboratory must be accredited to ASTM F963-11, Section 8.3 to have its test results used to demonstrate compliance with the limits given in section 4.3.5. In the example above, the testing for lead in paint, with the modifications, could be used to determine if the elements of interest pass the screening test and the toy can be certified to section 4.

07/25/2012http://www.cpsc.gov/PageFiles/110527/3ptreq.pdf (87%)
Summary: Requirements Pertaining to Third Party Conformity Assessment Bodies
Extract: 3 to determine how much barium would leach out (compared to the limit of 1,000 ppm soluble barium). We recognize that firms potentially could reduce testing costs if a single test would meet the screening test of section 8.3.1 of ASTM F 963-11 and the CPSIA lead content requirements for paint, metals, or nonmetals. The methods provided in section 8.3.1 of ASTM F 961-11 refer to CPSC test methods, but with a prescribed modification. The CPSC test methods for lead in paint (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1003-09_1.pdf), lead in nonmetals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1002-08_1.pdf), and lead in metals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1001-08_1.pdf) each allow for modifications based on sound chemical judgment and knowledge.

07/26/2012http://www.cpsc.gov/PageFiles/111113/3ptreq.pdf (87%)
Summary: Requirements Pertaining to Third Party Conformity Assessment Bodies May 24, 2012
Extract: 3 to determine how much barium would leach out (compared to the limit of 1,000 ppm soluble barium). We recognize that firms potentially could reduce testing costs if a single test would meet the screening test of section 8.3.1 of ASTM F 963-11 and the CPSIA lead content requirements for paint, metals, or nonmetals. The methods provided in section 8.3.1 of ASTM F 961-11 refer to CPSC test methods, but with a prescribed modification. The CPSC test methods for lead in paint (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1003-09_1.pdf), lead in nonmetals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1002-08_1.pdf), and lead in metals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1001-08_1.pdf) each allow for modifications based on sound chemical judgment and knowledge.

07/25/2012http://www.cpsc.gov/PageFiles/110129/3ptreq.pdf (87%)
Summary: 3ptreq
Extract: 3 to determine how much barium would leach out (compared to the limit of 1,000 ppm soluble barium). We recognize that firms potentially could reduce testing costs if a single test would meet the screening test of section 8.3.1 of ASTM F 963-11 and the CPSIA lead content requirements for paint, metals, or nonmetals. The methods provided in section 8.3.1 of ASTM F 961-11 refer to CPSC test methods, but with a prescribed modification. The CPSC test methods for lead in paint (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1003-09_1.pdf), lead in nonmetals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1002-08_1.pdf), and lead in metals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1001-08_1.pdf) each allow for modifications based on sound chemical judgment and knowledge.

05/24/2012http://www.cpsc.gov/PageFiles/103160/3ptreq.pdf (87%)
Summary: Requirements Pertaining to Third Party Conformity Assessment Bodies, Notice of Proposed Rulemaking, COMMENT REQUEST (CPSC Docket no. CPSC-2012-0026)
Extract: 3 to determine how much barium would leach out (compared to the limit of 1,000 ppm soluble barium). We recognize that firms potentially could reduce testing costs if a single test would meet the screening test of section 8.3.1 of ASTM F 963-11 and the CPSIA lead content requirements for paint, metals, or nonmetals. The methods provided in section 8.3.1 of ASTM F 961-11 refer to CPSC test methods, but with a prescribed modification. The CPSC test methods for lead in paint (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1003-09_1.pdf), lead in nonmetals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1002-08_1.pdf), and lead in metals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1001-08_1.pdf) each allow for modifications based on sound chemical judgment and knowledge.

05/24/2012http://www.cpsc.gov/PageFiles/110625/3ptreq.pdf (87%)
Summary: Requirements Pertaining to Third Party Conformity Assessment Bodies, Notice of Proposed Rulemaking (CPSC Docket no. CPSC-2012-0026), May 24, 2012
Extract: 3 to determine how much barium would leach out (compared to the limit of 1,000 ppm soluble barium). We recognize that firms potentially could reduce testing costs if a single test would meet the screening test of section 8.3.1 of ASTM F 963-11 and the CPSIA lead content requirements for paint, metals, or nonmetals. The methods provided in section 8.3.1 of ASTM F 961-11 refer to CPSC test methods, but with a prescribed modification. The CPSC test methods for lead in paint (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1003-09_1.pdf), lead in nonmetals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1002-08_1.pdf), and lead in metals (http://www.cpsc.gov/about/cpsia/CPSC-CH-E1001-08_1.pdf) each allow for modifications based on sound chemical judgment and knowledge.

09/17/2012Section 217. Penalties (35%)
Summary: Commissioner's Statements Civil Penalty Factors, Interim Final Interpretative Rule, August 19, 2009: Chairman Tenenbaum [PDF], Commissioner Moore [PDF], Commissioner Nord [PDF], Commissioner Northup [PDF] Section 217.
Extract: 2009 [PDF] Federal Register Notices Civil Penalty Factors, 16 CFR 1119, Final Interpretative Rule, March 31, 2010 [Text] [PDF] Civil Penalty Factors, Interim Final Interpretative Rule - 16 CFR 1119, September 1, 2009 [Text] [PDF] CORRECTION - Civil Penalty Factors; Withdrawal of Proposed Rule, September 1, 2009 [Text] [PDF] Civil Penalty Factors; Withdrawal of Proposed Rule, August 26, 2009 [Text] [PDF] Civil Penalty Criteria: Section 217(b)(2) of the Consumer Product Safety Improvement Act ("CPSIA") [PDF] Comments Civil Penalty Factors Interim Final Interpretative Rule (Docket CPSC-2009-0068) - Comments 2-11,

09/17/2012Section 212. Establishment of a Public Consumer Product Safety Databas... (33%)
Summary: Reports to Congress Report to Congress Pursuant to Section 212 of the CPSIA of 2008 - Implementation of a Searchable Consumer Product Safety Incident Database, September 10, 2009 [PDF] Section 212. Establishment of a P
Extract: Notice of Hearing (on November 10, 2009), October 7, 2009 [PDF] Public Comments Publicly Available Consumer Product Safety Information Database, CPSC-2010-0041 Comments 0002 - 0038, as of October 1, 2010 [PDF] Public Comments: Meeting: Establishment of a Public Consumer Product Safety Incident Database; Public Workshop, CPSC-2009-0112, March 15, 2010 - Written Comments [PDF] Presentations and Written Comments: Public Hearing Establishment of a Public Consumer Product Safety Incident Database, Tuesday November 10, 2009 [PDF] For more information on the CPSIA sign-up for our CPSIA e-mail list at https://www.

07/30/2012Suggested Recordkeeping Forms for 16 CFR 1633 Standard for the Flammab... (32%)
Summary: Suggested Recordkeeping Forms for 16 CFR 1633 Standard for the Flammability (Open Flame) of Mattress Sets (PDF fill-in forms) Qualified Prototype Test Record Confirmed Prototype Test Record Qualified/Confirmed Prototype Records Subordin
Products
Electronics (282)
Gasoline (279)
Reading (94)
Thermostats (89)
Computers & Monitors & Project... (88)
Elevators (87)
Compact Discs (CDs) (70)
Storage Media (70)
Containers and Packaging (69)
Drywall (67)
Metal (49)
Plastic (35)
Babies and Kids (33)
Hats and Scarves (28)
Kitchen Mixing Bowls or Canist... (25)
Fax Machines (23)
Sheets or Pillowcases (21)
Wood (20)
Clothing (19)
Chains (19)

Hazards
Electrical (280)
Lead (24)
Injury (22)
Falling (22)
Poisoning (18)
Fire (18)
Carbon Monoxide (12)
Chemical Burn (9)
Chemical (8)
Ingestion (5)
Cuts (5)
Inhalation (3)
Entrapment (3)
Burn (3)
Strangulation (2)
Physical (2)
Collision (2)
Phthalates (2)
Electrocution (1)
Cadmium Poisoning (1)

Content Types
Safety Information Center (595)
Business Education (19)
Federal Register Notice (14)
Safety Bulletin (8)
Voluntary Standard Activity (7)
Peer Review (7)
Regulatory Information (6)
Law (4)
Memorandum of Understanding (3)
Laboratory Accreditation (2)
Report (2)
Import Safety (2)
Testimony (2)
Briefing Package (1)
Rulemaking (1)
Agreement (1)
Research and Statistics (1)
Testing (1)
Settlement Agreement (1)


    Go to Page: