Search Results


Search
Date from (mm/dd/yyyy): Date to: (mm/dd/yyyy)

    Go to Page: 

Terms found entire site: cadmium(491),
Found 179 Documents Showing Results 1 to 10
04/03/2015http://www.cpsc.gov/Global/Business-and-Manufacturing/Small%20Business... (97%)
Summary: Report to the Committees on Appropriations of the House and Senate on the Status of CPSC Efforts to Provide Third Party Testing Cost Relief While Still Assuring Compliance
Extract: 7 The elements are antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium. 8 The materials are unfinished woods, cotton, linen, wool, silk, bamboo, beeswax, and paper. The cost of the contract is $77,229. -6-recommendations for determinations, as well as conducting an economic analysis. In Fiscal Year 2015, CPSC staff intends to submit to the Commission a draft NPR and briefing package recommending that the Commission determine that certain materials do not contain any of the elements listed in Table 1 of the Toy Standard at concentrations above their solubility limit, and thus, do not require third party testing to assure compliance.
04/03/2015http://www.cpsc.gov/Global/Research-and-Statistics/Technical-Reports/T... (100%)
Summary: Concentrations of Selected Elements in Unfinished Wood and Other Natural Materials, Contract No. CPSC-D-12-0001, TERA Contractor report for CPSC
Extract: 3.2.4 Cadmium The following information on Factors 2 and 3 for cadmium is summarized from the ATSDR Toxicological Profile for cadmium (ATSDR, 2012a). Cadmium is a naturally occurring soft, silver-white element found in the earth's crust, and only exists in the Cd+2 state. ATSDR (2012a) lists and reports chemical properties for cadmium, cadmium carbonate, cadmium chloride, cadmium oxide, cadmium sulfate, and cadmium sulfide, of which cadmium chloride and cadmium sulfate are soluble in water.

03/24/2015http://www.cpsc.gov/Global/About-CPSC/Reports/Miscellaneous/Staff-Repo... (97%)
Summary: Status of CPSC Efforts to Provide Third Party Testing Cost Relief While Still Assuring Compliance
Extract: 7 The elements are antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium. 8 The materials are unfinished woods, cotton, linen, wool, silk, bamboo, beeswax, and paper. The cost of the contract is $77,229. -6-recommendations for determinations, as well as conducting an economic analysis. In Fiscal Year 2015, CPSC staff intends to submit to the Commission a draft NPR and briefing package recommending that the Commission determine that certain materials do not contain any of the elements listed in Table 1 of the Toy Standard at concentrations above their solubility limit, and thus, do not require third party testing to assure compliance.
01/13/2015CPSC Chronic Hazard Guidelines (100%)
Summary: Interim Enforcement Policy on Component Testing and Certification of Children's Products
Extract: cadmium in illustrate the cati3gories the Commission 1 alephone number," 15 U.S.C. 1277(b) 45). silver dders. 134 Rec. 5~~~ envisions. tn making the &mination Thus, Congress has required that an (Oct. 19,1988] (sta'tementaf Sen. Gore). of whetlaera product is an art materiel, -45630 Federal Register /Vol. 57, No. 197 /~ ; i d a ~dc, t ober 9, 1992 1 Rules and Regulations -the Commission would consider the procedures. However, in enforcing $5 1500.14(b)(8](i) (F) and (GI in the intended and anticipated uses of the LHAMA the Commission is primarily codification below.

02/24/2014http://www.cpsc.gov/Global/Research-and-Statistics/Information%20Quali... (100%)
Summary: Denied Correction Request from (PEER) Public Employees for Environmental Responsibility on Synthetic Turf Under the Information Quality Act and CPSC's Response
Extract: Nor does he dispute the recitation in our complaint about the long list of dangerous chemicals found in shredded tires (including arsenic, benzene, cadmium, chromium, cobalt, mercury, carbon black and polycyclic aromatic hydrocarbons) and that children playing on these surfaces risk direct and indirect exposure to these chemicals. Furthermore, just looking at the grass blades in isolation, the 2008 Report did no "testing for other toxics, including those that are of concern for children; in particular, toxins such as cadmium and phthalates are required to be tested for in children's products," as noted in our complaint. c) Lead Exposure Ignored.

02/14/2014http://www.cpsc.gov/Global/Newsroom/FOIA/CommissionBriefingPackages/20... (97%)
Summary: Briefing Package: Meeting Notice for CPSC Workshop on Potential Ways to Reduce Third Party Testing Costs
Extract: 5 of ASTM F963-11 lists the limits for the soluble amounts of eight elements (antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium) allowable in toy substrates. DRAFT 2-12-14 4 The CPSIA generally requires that children's products that are subject to a CPSC children's product safety rule must be tested by a third party CPSC-accepted laboratory for compliance with applicable CPSC rules. 15 U.S.C. 2063(a)(2)1. Public Law No. 112-28 (August 12, 2011) (Pub. L. No. 112-28) directed the CPSC to seek comment on "opportunities to reduce the cost of third party testing requirements consistent with assuring compliance with any applicable consumer product safety rule, ban, standard, or regulation.
11/05/2013Lead Testing for Children's Metal Jewelry FAQ (100%)
Summary: Lead Testing for Children's Metal Jewelry FAQ
Extract: Staff encourages manufacturers, importers, distributors, and retailers to employ methods such as the methodology published for lead in children's metal jewelry, and standard methods referenced therein such as ASTM F963, ASTM D5517, and AOAC 974.02. In addition to total lead analysis and acid extraction tests, wipe testing and saline extraction testing may be appropriate for some items, depending on their method of use, size, etc. CPSC staff reports on lead in vinyl miniblinds (September 1996) and lead and cadmium in children's polyvinyl chloride (PVC) products (November 1997) should be reviewed for discussions of lead limits and testing of these type of products.
06/14/2013http://www.cpsc.gov/Global/About-CPSC/Reports/Annual-Reports/FY12Annua... (77%)
Summary: 2012 Annual Report
Extract: s jewelry for potential cadmium hazards during a teleconference with Dr. Jeffrey Weidenhamer 2/23/2012 Directorate for Engineering Sciences, and various CPSC staff American Society for Testing and Materials (ASTM) Discussed ballot results and standards revisions with ASTM F15 Bassinet Subcommittee 2/23/2012 Counsel to Commissioner Robert Adler Safe Kids Worldwide Discussed pending legislation on Carbon Monoxide detector and Carbon Monoxide education programs during meeting 2/27/2012 Directorate for Engineering Sciences Underwriters Laboratories (UL) Discussed and developed test plan to simulate hand movement during table saw kickback and measure approach speeds, during web conference of the Underwriters Laboratories (UL) Table Saw Safety Working Group 2/
05/17/2013http://www.cpsc.gov/Global/Newsroom/FOIA/Investigations-Incident-Repor... (100%)
Summary: Crib Bumper Investigation: 110308CCC2350
Extract: HEAI/Y METAL SCREEN: (Artimony, A$ nic, Lead, Barium, Cadmium, Bismuth, Mcrcury, Selcniurn) *BY REQUDST ONLY; ABBREVIATIOitiS: POS=PositiveN; EG=NegativeU; NS=Specimeunn suitablcfo r tpsling: QNS=Quantityin suflicientf or analysis; NTDN=NoI Done;C HEMT{linical chemisi4,;< =lssst han;> =greaterth 6niL RL= lower reportingl imii. UNITS FOR VOLATILES: 100m g/dL"0 .100g ldL" 0 100{ /o, UNITS: I mg/L = I 000 Fg/L = 1000 ngml 9) l0) il) t2) I certify that the specimen requirementsT. he resulti n numbers exclusively Nameidentifiedb y this case,n umber1 N2010-0160h4a veb eenh andeleda nd this reportr elatet o the itemst ested For purposeso f identificationa nd is subjectt o changeb asedo n receipto f infoimation.
04/16/2013Request for Information Regarding Third Party Testing for Lead Content... (100%)
Summary: Request for Information Regarding Third Party Testing for Lead Content, Phthalate Content, and the Solubility of the Eight Elements Listed in ASTM F963-11 This Federal Register Notice has been updated to correct the Docket Number. Action N
Extract: ASTM F963-11 includes restrictions on the maximum solubility of eight elements (antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium) in coatings and substrates of toys subject to that standard. The CPSIA also limits the concentration of six prohibited phthalates in component parts of children's toys and child care articles. The CPSIA limits the lead content of component parts of children's products to 100 ppm (currently) in each accessible component part. A children's product is a consumer product that is designed and intended primarily for children 12 years old and younger.
Products
Babies and Kids (152)
Containers and Packaging (129)
Metal (82)
Clothing (75)
Plastic (62)
Jewelry (62)
Glass (61)
Fasteners (56)
Clothing and Accessories (51)
Accessories (46)
Outerwear (46)
Toys (42)
Paints or Varnishes or Shellac... (31)
Other Glass Bottles or Jars (24)
Metal or Plastic Molding Sets (24)
Chemicals (23)
Gasoline (22)
Wood (22)
Monitors and Displays (21)
Other Drugs or Medications (19)

Hazards
Lead (79)
Cadmium Poisoning (60)
Phthalates (51)
Ingestion (47)
Chemical (45)
Physical (40)
Fire (37)
Falling (22)
Carbon Monoxide (21)
Cuts (20)
Chemical Burn (18)
Injury (15)
Drowning (12)
Allergic Reaction (12)
Explosion (11)
Entrapment (11)
Poisoning (9)
Heat-Related Explosion (7)
Burn (6)
Paint (5)

Content Types
Briefing Package (22)
Public Comment (22)
Federal Register Notice (17)
Law (14)
Meeting Log (11)
Voluntary Standard Activity (10)
Report (8)
Testing (7)
Statement (7)
Ballot Vote (7)
Recall (6)
Technical Report (6)
Regulation (5)
Safety Guide (4)
Business Education (4)
Presentation (3)
Advisory Opinion (3)
In-Depth Investigation (3)
Petition (3)
Statistics (2)


    Go to Page: